PB-410/3-W
Manual Stretcher support PB-410/3 WThe PB-410/3 stretcher support offers a great quality-price ratio, mainly due to proven components, of great reliability and robustness.
The available front controls allow, in a very comfortable way both from inside and outside the ambulance, to carry out all movements, such as positive and negative trendelemburg, loading and unloading operation, lateral movement and longitudinal movement (230 mm).
It includes the anchoring system for Promeba stretchers.
It has a 350 mm stainless steel folding ramp to facilitate the loading and unloading of the stretcher and a scotch stainless steel tray for easy cleaning and maintenance.
It has space for a scoop stretcher.
Stretcher support system with manual Trendelenburg movement.
Longitudinal movement for quick and easy loading/unloading of the stretcher.
Extra longitudinal movement that allows you to move the stretcher support when it is inside the ambulance.
Stainless steel ramp to facilitate the loading process.
Ramp of 350mm in length.
Upper tray with accommodation and fixation for scoop stretcher.
Possibility of incorporating the winch system to load the stretcher with minimal effort.
Positive (+10%) and negative (-10%) Trendelenburg in manual mode.
Lateral movement by a pedal that extends over the entire width of the stretcher support, making it easier to operate.
Easy-access front controls for loading and unloading operations, with a new, more ergonomic and centered design.
Side control for manual Trendelenburg movement.
With protective covers on the lateral displacement system.
With protection at the bottom of the front controls to prevent damage to the cables.
STRETCHER SUPPORT TRAINING
TECHNICAL DATA
Large | 1928 mm
Width | 631 mm
Height min.-max. | 294 mm
Weight (without ramp) | 81 Kg
Ramp weight | 5,35 Kg
Max. Load | 300 Kg
Trendelemburg | -10º / +10 º
Lateral movement | 300 mm
Long. movement | 230 mm
